Sodium chlorite 25% + hydrochloric acid 4% - set 2 x 150 ml - from Unimedica
The 25% sodium chlorite + 4% hydrochloric acid set from Unimedica is suitable for the generation of chlorine dioxide (ClO2). Chlorine dioxide is tasteless and enables the disinfection of drinking water even at high pH levels. The NaClO2 included in the set combats microbes in water in a sustainable and environmentally friendly way. It is used not only as an oxidising agent but also widely as a bleaching agent for textiles and paper.
✓ high-quality 25% sodium chlorite + 4% hydrochloric acid
✓ bottled in two 150 ml glass bottles
✓ with acid-resistant HDPE (PE-HD) pipettes
€19.00
Available immediately,
ready for shipment within 1-2 working days
Ready-to-use solution for drinking water treatment. Use biocidal products with caution. Always read the label and product information before use!
Use biocidal products with care in glass bottles fitted with acid-resistant HDPE (PE‑HD) pipettes. Always read the label and product information before use!
For cleaning and disinfection of surfaces | Use biocidal products with care. Always read the label and product information before use!
European Pharmacopoeia quality — according to the original 1835 recipe
Produktinformationen
To ensure breakage-free transport of the two components, an exceptional fixed additional shipping charge of €3.50 applies.
Use biocidal products with care. Always read the label and product information before use!
Sodium chlorite (NaClO2) is the sodium salt of chlorous acid, not to be confused with table salt (NaCl). It is used as an oxidising agent and for the production of chlorine dioxide for the disinfection of water in water treatment systems and as a bleaching agent for textiles and paper. Sodium chlorite breaks down biofilm and combats microorganisms in water in a sustainable and environmentally friendly way.
Hydrochloric acid is an aqueous solution of gaseous hydrogen chloride. It is a strong inorganic acid and is classed as a mineral acid. Hydrochloric acid dissolves very well in water.
Chlorine dioxide can be generated from the combination of Component A (sodium chlorite) and Component B (hydrochloric acid). Chlorine dioxide ensures disinfection even at high pH values, is tasteless and is therefore suitable for the disinfection of waters for beverage and food production.
Spectrum of activity
For the disinfection of drinking water.
Important information
Use biocidal products with care. Always read the label and the enclosed leaflet before use! Never mix both bottles completely at once! Can cause fire or explosion; strong oxidiser. Harmful if swallowed. Keep out of reach of children! Store components in a cool, dry place. Protect from heat and sunlight. Do not store the prepared solution.
Sodium chlorite 25%
Safety instructions
If medical advice is required, have the product container or label at hand.
Keep out of reach of children.
May be corrosive to metals.
Harmful if swallowed. Causes serious eye damage. May damage organs (spleen) through prolonged or repeated exposure.
Very toxic to aquatic life with long-lasting effects.
Releases very toxic gases on contact with acids.
Do not inhale mist, vapour or spray. Keep away from clothing and combustible materials and store separately. Avoid release to the environment.
Wear protective gloves, protective clothing and eye and face protection. In case of contact with eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately contact a poison information centre or a doctor.
Dispose of contents and container in accordance with local, regional, national or international regulations.
BAuA-Reg-Nr.: N-101873 | UFI: TKJ5-H05H-H005-EF25
Hydrochloric acid 4%
Safety instructions
If medical advice is required, have the product container or label at hand.
Keep out of reach of children.
May be corrosive to metals.
Store only in the original container.
Wear protective gloves, protective clothing and eye and face protection. If on skin or hair: Immediately take off all contaminated clothing. Rinse skin with water or shower. In case of contact with eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately contact a poison information centre or a doctor.
Collect spilt quantities to avoid material damage.
Store in a corrosion-resistant container with a corrosion-resistant inner lining. Dispose of contents and container to an approved waste disposal facility.
BAuA-Reg-Nr.: N-101873 | UFI: VPJ5-00UW-T00N-3SN7
Country / Countries of Origin
Ingredients
Dosage instructions
storage
Store in a cool, dry place protected from light and keep tightly closed. Protect from heat and direct sunlight.
DISPOSAL: Dispose of emptied packaging in accordance with local recycling collection regulations.